The official website of Kodera Electronics Co.,Ltd.
Dual 4WD powerful stripping unit is equipped.
With that power, it can process the size of maximum 80sq(20mm).
which is a surprise in conventional compact machines.
It ’s a reliable machine that process battery cable, WL1 and WL2 without any difficulty.
| MODEL | C377A | |
|---|---|---|
| OUTER DIMENSIONS | W1,026mm ×D520mm ×H325mm | |
| WEIGHT | 86kg | |
| POWER SUPPLY | AC100V～AC240V（single phase）50Hz/60Hz | |
| POWER CONSUMPTION（100V） | 62W（Rated）378W（Max） | |
| AIR SUPPLY | 5Nℓ/min 0.5MPa※1 | |
| CUTTING LENGTH | 160mm～99,999mm | |
| CUTTING TOLERANCES | ±（ 0.1＋0.0005×L ）mm※2 L : indicates a cutting length. | |
| STRIPPING LENGTH | FRONT END | 0.1～300mm |
| REAR END | 0.1～150mm | |
| APPLICABLE WIRES | TYPE | Battery cable, W1, W2, VSF, IV, KV, UL, Teflon , Glass Wire, etc |
| SIZE | 80sq～AWG#16（1.25sq）※2 | |
| O.D. | Max φ20mm※2 | |
| WIRE FEED SPEED | Variable | |
| CUTTER MATERIAL | Ultra fine particle alloy | |
| DRIVE SUPPLY | Stepping pulse motor / Air cylinder | |
※1. Use clean,dry air. ※2.Depending on the wire type.
| Total Length | Pieces Processing speed：9 | Pieces Processing speed：7 |
|---|---|---|
| 180mm | 726 | 638 |
| 300mm | 696 | 614 |
| 500mm | 655 | 578 |
| 1000mm | 567 | 501 |
| 2000mm | 447 | 397 |
| 3000mm | 369 | 329 |
| 5000mm | 274 | 244 |
Core diameter ： 10mm
Blade move back ： 4mm
Both ends stripping ： 10mm
