The official website of Kodera Electronics Co.,Ltd.
| MODEL | C376A | |
|---|---|---|
| OUTER DIMENSIONS | W540mm ×D545mm ×H335mm | |
| WEIGHT | 52kg | |
| POWER SUPPLY | AC100V 110V 220V 240V（Single phase）50Hz/60Hz | |
| POWER CONSUMPTION（100V） | 30W（Rated）220W（Max） | |
| AIR SUPPLY | 9Nℓ/min 0.5MPa※1 | |
| CUTTING LENGTH | 0.1mm～99,999mm | |
| CUTTING TOLERANCES | ±(0.1+0.0005×L)mm※2 L : indicates a cutting length. | |
| APPLICABLE WIRES | TYPE | AV, MLFC ,VSF, IV, KV, UL, Teflon , Glass Wire, etc |
| SIZE | 50sq～0.75sq ※2 | |
| O.D. | Max φ17mm ※2 | |
| WIRE FEED SPEED | Variable | |
| CUTTER MATERIAL | Ultra fine particle alloy | |
| DRIVE SUPPLY | Stepping pulse motor / Air cylinder | |
※1. Use clean,dry air. ※2. Depending on the wire type.
| Total Length | Pieces |
|---|---|
| 100mm | 1,710 |
| 200mm | 1,580 |
| 300mm | 1,460 |
| 500mm | 1,260 |
| 800mm | 1,070 |
| 1000mm | 970 |
| 1500mm | 780 |
| 2000mm | 660 |
| 3000mm | 500 |
| 5000mm | 330 |
Core diameter : 0.75mm
Blade move back : 0.15mm
Both ends stripping : 3mm
Program : A200
Just set up CC-100 on the left side of the CASTING series, it carries the finished wires by belt-conveyor and neatly deposits those wires on the tray.
It contributes to improving the work efficiency rate.
| MODEL | CC-100 |
|---|---|
| OUTER DIMENSIONS | W1200mm ×D340mm ×H135mm |
| WEIGHT（NET） | 10kg |
| POWER SUPPLY | AC100VorAC200V（single phase）50Hz/60Hz |
| POWER CONSUMPTION | MAX15W（AC100V） |
| O.D. SIZE | φ1mm Minimum※ |
| DRIVE | Induction motor |
| Air cylinder |
※Depends on wire type