The official website of Kodera Electronics Co.,Ltd.
With attaching optional equipments, wide array of processing such as Slitting or Mid-stripping
processing can be performed in addition to
Cut, Strip, Half-strip, Double Sheath-strip and Divide-strip.
MODEL | C371A | |
---|---|---|
OUTER DIMENSIONS | W430mm ×D420mm ×H270mm | |
WEIGHT | 27kg | |
POWER SUPPLY | AC100V or AC200V~240V(Single Phase)50Hz/60Hz | |
POWER CONSUMPTION(100V) | 47W(Rated)215W(Max) | |
CUTTING LENGTH | 0.1mm~99,999mm | |
CUTTING TOLERANCES | ±( 0.1+0.0005×L )mm※2 L:indicates a cutting length. | |
STRIPPING LENGTH | FRONT END | 0.1~47.9mm |
REAR END | 0.1~47.9mm | |
APPLICABLE WIRES | TYPE | AVSS,VSF, IV, KV, UL,Teflon , Glass Wire, etc |
SIZE | AWG#7(10sq)~AWG#28(0.08sq)※2 | |
O.D. | Max φ11mm※2 | |
WIRE FEED SPEED | Variable | |
CUTTER MATERIAL | Ultra fine particle alloy | |
DRIVE SUPPLY | Stepping pulse motor |
※2. Depending on the wire type.
Total Length | Pieces |
---|---|
100mm | 7,100 |
200mm | 6,550 |
300mm | 6,050 |
500mm | 5,250 |
800mm | 4,400 |
1000mm | 3,950 |
1500mm | 3,150 |
2000mm | 2,700 |
3000mm | 1,950 |
5000mm | 1,350 |
Both ends stripping 3mm
Setting of speed : 9
Thin wire mode
Wire : UL1007/AWG#22
Automatic mid stripping is realized.
CMS-801A2 can handle wires with an outer diameter of up to 8mm.
It can mid strip in up to 10 different positions on a single wire.
Automation has been accomplished thus far by this revolutionary equipment.
MODEL | CMS-801A2 |
---|---|
OUTER DIMENSIONS | W185mm ×D355mm ×H190mm |
WEIGHT | 12kg |
POWER CONSUMPTION | MAX390W 65W while idling※ |
MID STRIPPING LENGTH | Max. up to 34mm |
MID STRIPPING DISTANCE | Min. 48.5mm |
MID STRIPPING POSITIONS | Max. up to 10positions |
MAX WIRE SIZE | φ8mm |
DRIVE | Stepping motor |
Just set up CC-100 on the left side of the CASTING series, it carries the finished wires by belt-conveyor and neatly deposits those wires on the tray.
It contributes to improving the work efficiency rate.
MODEL | CC-100 |
---|---|
OUTER DIMENSIONS | W1200mm ×D340mm ×H135mm |
WEIGHT(NET) | 10kg |
POWER SUPPLY | AC100VorAC200V(single phase)50Hz/60Hz |
POWER CONSUMPTION | MAX15W(AC100V) |
O.D. SIZE | φ1mm Minimum※ |
DRIVE | Induction motor |
Air cylinder |
※Depends on wire type