The official website of Kodera Electronics Co.,Ltd.
C300A AWG#16(1.25sq)~AWG#36(0.01sq) CASTING C300A has been esteemed basic performance, it became the most compact design and light weight that we have ever made.
It has better performance than our old model CASTING 300 and moreover has good performance of processing thin line.
MODEL | C300A | |
---|---|---|
OUTER DIMENSIONS | W370mm ×D370mm ×H296mm | |
WEIGHT | 24kg | |
POWER SUPPLY | AC100V or AC200V~240V(Single Phase)50Hz/60Hz | |
POWER CONSUMPTION(100V) | 33W(Rated)182W(Max) | |
CUTTING LENGTH | 0.1mm~99,999mm | |
CUTTING TOLERANCES | ±( 0.1+0.0005×L )mm※2 L:indicates a cutting length. | |
STRIPPING LENGTH | FRONT END | 0.1~20mm |
REAR END | 0.1~20mm※2 | |
APPLICABLE WIRES | TYPE | AVSS,VSF, IV, KV, UL,Teflon , Glass Wire, etc |
SIZE | AWG#16(1.25sq)~AWG#36(0.01sq)※2 | |
O.D. | Max φ2.5mm※2 | |
WIRE FEED SPEED | Variable | |
CUTTER MATERIAL | Ultra fine particle alloy | |
DRIVE SUPPLY | Stepping pulse motor |
※2. Depending on the wire type.
Total Length | Pieces |
---|---|
100mm | 5,200 |
200mm | 4,650 |
300mm | 4,230 |
500mm | 3,600 |
800mm | 2,900 |
1000mm | 2,550 |
1500mm | 2,000 |
2000mm | 1,700 |
Both ends stripping 3mm
Setting of speed : 9
Core diameter : 0.6mm
Program A201
Thin wire mode
Just set up CC-100 on the left side of the CASTING series, it carries the finished wires by belt-conveyor and neatly deposits those wires on the tray.
It contributes to improving the work efficiency rate.
MODEL | CC-100 |
---|---|
OUTER DIMENSIONS | W1200mm ×D340mm ×H135mm |
WEIGHT(NET) | 10kg |
POWER SUPPLY | AC100VorAC200V(single phase)50Hz/60Hz |
POWER CONSUMPTION | MAX15W(AC100V) |
O.D. SIZE | φ1mm Minimum※ |
DRIVE | Induction motor |
Air cylinder |
※Depends on wire type